Original Factory Zirconium Ball - 13X type Molecular Sieve – Sanxin Hi-Tech Ceramics

Original Factory Zirconium Ball -
 13X type Molecular Sieve  – Sanxin Hi-Tech Ceramics

Short Description:

13X Molecular Sieve  Introduction Molecular Sieve 13X is the sodium form of the type X crystal and has a much larger pore opening than the type A crystals.  It will adsorb molecules with a kinetic diameter of less than 9 Angstrom (0.9 nm) and exclude those larger. It also has the highest theoretical capacity of the common adsorbents and very good mass transfer rates. It can remove impurities too large to fit into a type A crystal and is commonly used to separate nitrogen from oxygen.  Technic...


Product Detail

Product Tags

Related Video

Feedback (2)

With our abundant experience and considerate products and services, we have been recognized to be a reputable supplier for a lot of global consumers for Industrial Ceramic Application Beads , Silicon Nitride Ceramic , Zirconia Ceramic Bearing , To improved expand market, we sincerely invite ambitious individuals and providers to hitch as an agent.
Original Factory Zirconium Ball - 13X type Molecular Sieve – Sanxin Hi-Tech Ceramics Detail:

13X Molecular Sieve

 Introduction
Molecular Sieve 13X is the sodium form of the type X crystal and has a much larger pore opening than the type A crystals.  It will adsorb molecules with a kinetic diameter of less than 9 Angstrom (0.9 nm) and exclude those larger.

It also has the highest theoretical capacity of the common adsorbents and very good mass transfer rates. It can remove impurities too large to fit into a type A crystal and is commonly used to separate nitrogen from oxygen.

 Technical Parameter

Model 13X
Color Light gray
Nominal pore diameter 10 angstroms
Shape Sphere Pellet
Diameter (mm) 1.7-2.5 3.0-5.0 1.6 3.2
Size ratio up to grade (%) ≥98 ≥98 ≥96 ≥96
Bulk density (g/ml) ≥0.7 ≥0.68 ≥0.65 ≥0.65
Wear ratio (%) ≤0.20 ≤0.20 ≤0.20 ≤0.20
Crushing strength (N) ≥35/piece ≥85/piece ≥30/piece ≥45/piece
Static H2O adsorption (%) ≥25 ≥25 ≥25 ≥25
Static CO2 adsorption (%) ≥17 ≥17 ≥17 ≥17
Water content (%) ≤1.0 ≤1.0 ≤1.0 ≤1.0
 
Typical Chemical Formula Na2O. Al2O3. (2.8±0.2) SiO2. (6~7)H2O
SiO2 : Al2O3 ≈2.6-3.0
Typical Application a) Removal of CO2 and moisture from air (air pre-purification) and other gases.
b) Separation of enriched oxygen from air. 
c) Removal of n-chained compositions from aromatics.
d) Removal of R-SH and H2S from hydrocarbon liquid streams (LPG, butane etc.)
e) Catalyst protection, removal of oxygenates from hydrocarbons (olefin streams).
f) Production of bulk oxygen in PSA units.
 
Package : Carton box; Carton drum; Steel drum
MOQ: 1 Metric Ton
Payment Terms: T/T; L/C; PayPal; West Union
Warranty: a) By National Standard HG-T_2690-1995
b) Offer lifetime consultation on problems occurred
 
Container 20GP 40GP Sample order
Quantity 12MT 24MT < 5kg
Delivery Time 3 days 5 days Stock available

 Application

 Removal of CO2 and moisture from air (air pre-purification) and other gases.
 Separation of enriched oxygen from air.  
 Removal of mercaptans and hydrogen sulphide from natural gas.
 Removal of mercaptans and hydrpogen sulphide from hydrocarbon liquid streams (LPG, butane, propane etc.)
 Catalyst protection, removal of oxygenates from hydrocarbons (olefin streams).
 Removal of n-chained compositions from aromatics.
 Production of bulk oxygen in PSA units .
 Production of medical oxygen in small scale oxygen concentrators 

 Regeneration:
Molecular sieve Type 13X can be regenerated by either heating in the case of thermal swing processes; or by lowering the pressure in the case of pressure swing processes. 
To remove moisture from a 13X molecular sieve, a temperature of 250-300°C is required. A properly regenerated molecular sieve can give moisture dew points below -100°C, or mercaptan or CO2 levels below 2 ppm.
The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process 
 Size 
 13X – Zeolites are available in beads of 1-2 mm(10×18 mesh), 2-3 mm(8×12 mesh), 2.5-5 mm(4×8 mesh) and as powder, and in pellet 1.6mm, 3.2mm.
 Attention
 To avoid damp and pre-adsorption of organic before running, or must to be reactivated.

 


Product detail pictures:

Original Factory Zirconium Ball -
 13X type Molecular Sieve  – Sanxin Hi-Tech Ceramics detail pictures


Related Product Guide:
Exquisite Porcelain and Ceramic Beads – Truly World Class
Ceramic Ball Bearings

The very rich projects management experiences and one to one service model make the high importance of business communication and our easy understanding of your expectations for Original Factory Zirconium Ball - 13X type Molecular Sieve – Sanxin Hi-Tech Ceramics, The product will supply to all over the world, such as: Malta , Pretoria , Thailand , We focus on providing service for our clients as a key element in strengthening our long-term relationships. Our continual availability of high grade products in combination with our excellent pre-sale and after-sales service ensures strong competitiveness in an increasingly globalized market.
  • Goods just received, we are very satisfied, a very good supplier, hope to make persistent efforts to do better.
    5 Stars By Alice from Tanzania - 2016.08.28 16:02
    The supplier cooperation attitude is very good, encountered various problems, always willing to cooperate with us, to us as the real God.
    5 Stars By Fernando from Gabon - 2016.04.28 15:45

    Related Products

    WhatsApp Online Chat !